Email:[email protected]
tupian

High Temperature And High Pressure Dyeing Machine In The Work Should Be How To Heat

High temperature and high pressure dyeing machine that we should be very familiar with, and if you are not familiar with the dyed machine can look at the information, this is not a detailed introduction, and today we mainly say that high temperature and high pressure dyeing machine insulation methods are what , Hope to let everyone better understand the high temperature and high pressure dyeing machine.

If you want to high temperature and high pressure dyeing machine to achieve insulation, we can take different according to different requirements, there are three main, the following simple and everyone to see.

1. The use of high pressure airless sprayer in the high temperature and high pressure dyeing machine surface coating insulation coating, he will make high temperature and high pressure dyeing machine surface thickness of 1.5 ~ 5mm in the formation of dense thermal insulation coating.

2. According to the first insulation method we have the following specific steps:

(1) to remove the high temperature and high pressure dyeing machine surface of various oil and protective compounds.

(2) To open the agitator at a temperature of not lower than 21 ° C, stir the insulating paint in the paint bucket to a milky consistency.

(3) the use of high-pressure airless sprayer before mixing a good thermal insulation coating for layered spraying. To ensure that the thickness of each coating to meet the requirements, until the last coating completely dry, in the next coating of the coating.

3. All of the above high temperature and high pressure dyeing machine vertical surface, each layer of thermal insulation coating thickness of 0.23-0.25mm.

Of course, the traditional high temperature and high pressure dyeing machine insulation or a certain defect, so we need a new type of insulation methods, we can work environment, energy efficiency and other aspects to improve.

top