Email:[email protected]

High temperature and High pressure Yarn Sample Dyeing Machine

Product Detail

Yarn Sample Dyeing Machine

Basic Info

  • Automatic Grade:Automatic
  • Working Width:1kg-8kgs
  • Material:Ss316L
  • Load Capacity:1kg~8kgs
  • Certification:CE, ISO
  • Customized:Customized
  • Condition:New
  • Machine Type:Hthp Sample Dyeing Machine
  • Liquor Ratio:1:5-6
  • Max Working Temp.:140deg.C
  • Flow Direction:in-out/out-in
  • Controller:Setex 707+PLC
  • Trademark:Sunsky
  • Transport Package:Export Standard Packing
  • Origin:Jiangsu, China

Product Description

Yarn lab Dyeing Machine is suitable for dyeing processing cotton, polyester, acrylic, nylon, sheep, whool, T/C, acrylic /cotton blends, polyester, wool blends, hemp and cotton blends or any kind of blended yarn.

Technical Data

1. Design Temperature 160° C
2. Max working temperature: 140° C
3. Max working pressure: 0.45 Mpa
4. Savings in power and steam consumption by 15-20%
5. Heating time: Approx 30 min for temp rise 20° C -130° C(at steam pressure of 0.70 Mpa)
6. Cooling time: Approx 20 min for 130° C-80° C (at cooling water pressure of 0.3Mpa)


1. Balanced mixed-flow pump, as well as combination of axial and centrifugal principles, that can deliver greater liquor flow and higher heading for uniform dyeing effect at less energy consumption.
2. Internal heat-exchanger, coil-type, for more efficient steam utilization.
3. Tail-injection funnel device, patented design, for more homogenous dye and chemical liquor introduction to the main kier for uniform dyeing effection.
4. Flow reversal system by means of pneumatic cylinder.
5. Equipped with various type material carriers, i. E., packages, hanks, loose fiber, beams, etc.
6. Machine can be supplied with fully-flooded system, air-pad system, or combination of both.