Email:[email protected]
tupian

Fabric Dyeing Process

Reactive Dyeing Light Colors

 

● Put the dying material in the feeding tank and start to dissolve it.

● Fill the dyeing machine with water and run it for 5 minute.

● Intering the solution from the feeding tank to the machine in 20 minutes.

● Put the salt in the feeding tank and dissolve it.

● Intering the solution to the machine in 10 minutes.

● Raise the temperature to 50 or 60 degree depend on the kind of dying 20 minutes.

● Put Soda H in the feeding tank.

● Intering the solution to the machine and stay 20 minutes.

● Ampty the machine from water and at this stage the dying stage is completed.

Fabric Sample dyeing machine

AFTER DYEING PROCESS For Light Color

 

● Fill the machine with water and run it on cold water for 10 minutes

● Empty the machine from water

● Put Fabric acid to the feeding tank and dissolve it

● Fill the machine with water and feeding the machine with the solution 10 minutes

● Ampty the machine from water

● Put the washed material in the feeding tank

● Fill the machine with water and inter the washed solution to the machine raise Te to 85 for 5 min

● Empty the machine from water

● Fill the machine cold water and run it for 10 minutes

● Empty the machine from water

● Fill the machine in water and run it for 10 min

● Empty the machine

● Fill the machine in water and run it for 10 min

● Put softness material and acid in feeding tank

● Empty the machine from water

● Fill the machine in water and run it and inter the solution from feeding tank for 30 min

● Emty the machine from water and take off the fabric from the machine

top